Parameters:
Receive Frequency Range: 300MHz - 2700MHz
Detect Dynamic Range: Greater than 73DB
Detection Sensitivity: Lower than 0.03mw
Alarm: Sound alarm with LED flashes
Sound Alarm Method: As close to the object the alarm sound will rapidly
LED Indication Mode: 10 level LED lighting indication
Battery: 1000mah 3.7V Lithium battery
Power Supply: DC 5V 1000mah
Material: ABS Plastic
RED LED Light: 6 pieces RED LED light
Working Current: 30mA
Working Time: 12 - 15 hours
RF Antenna: 300Mhz - 2700Mhz
Product Dimension: Approx.5*2*18.7cm / 1.96*0.78*7.36 inches
Weight: 200g / 7.0oz
How to Use?
Move the mode switch to "S" position, please rotate the knob to right to power on the device, and turn the third LED light on first, close the detector to your cellphone, if the detector LED light flashes, you can handle the detector close to object area to inspect, if the detector LED light does not flash, you can rotate the knob to turn the fourth or fifth LED light on, increase the sensitivity, then you can get the best performance, please do not turn the tenth LED light on, it will reach the maximum sensitivity, the device will alarm immediately.
Move the mode switch to "D" position, hold the device identify the magnetic, the magnet sensor area touch the magnet object, the device will emit sound alarm and LED lights flash, because this device has no magnet probe, it can't inspect in/under car, truck.
Press the button shortly to light on the red LED light for inspection pinhole camera lens, press and hold the button to change to vibration alarm
Package Included:
1 x RF Detector
1 x Magnet Probe
1 x Antennas
1 x USB Cable
1 x User Manual
){kind=link}
){kind=link}